Light after shave with Liponate OP-26 No. 1596
Light, fast absorbing formula using the conditioning effort of Liponate® OP-26 which leaves the skin looking smooth and refreshed...
DESCRIPTION:
Light, fast absorbing formula using the conditioning effort of Liponate® OP-26 which leaves the skin looking smooth and refreshed. Hylasome® EG10 improves skin moisturization.
FORMULATION:
SEQUENCE | PERCENT | INGREDIENT | INCI NAME |
---|---|---|---|
1 | 81.91 | Deionized Water | Water |
1 | 0.10 | Disodium EDTA (119) | Disodium EDTA |
1 | 0.15 | Carbopol Ultrez 20 (9) | Acrylates/C10-30 Alkyl Acrylate Crosspolymer |
1 | 2.50 | Liponic® EG-1(1) | Glycereth-26 |
1 | 2.50 | Glycerin 96% (119) | Glycerin |
2 | 3.50 | Lipomulse® Luxe (1) | Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20 |
2 | 2.50 | Liponate® OP-26 (1) | PPG-26 Oleate |
2 | 4.50 | Liponate® NEB (1) | C12-15 Alkyl Benzoate |
3 | 0.34 | Sodium Hydroxide 18% Sol. (119) | Sodium Hydroxide |
4 | 0.50 | Lipo® Bisabolol (1) | Bisabolol |
5 | 1.50 | Hylasome® EG-10(1) | Sodium Hyaluronate Crosspolymer |
6 | Qs/100.00% | Preservative | Preservative |
(1) Lipo Chemicals, Inc.
(9) Lubrizol
(119) Ruger
PROCEDURE:
1. Mix water, disodium EDTA with medium speed propeller stirring and start heating.
2. Add Carbopol Ultrez 20 to main vessel, continue mixing and heating.
3. Add remain Sequence #1 ingredients to main vessel, continue mixing and heating to 75-80°C.
4. In separate vessel combine Sequence #2 ingredients and start heating to 75-80°C.
5. Combine Sequence #2 into main vessel when temperature reaches 75-80°C.
6. Mix with medium speed propeller stirring, start cooling.
7. Add Sequence #3 to main vessel, batch will thicken slightly, continue mixing and cooling.
8. When temperature reaches 50°C add Sequence #4 and Sequence #5 to main vessel while mixing, continue cooling.
9. Stop mixing when batch reaches 32°C.
SPECIFICATIONS:
pH: 6.90 ± 0.2
Viscosity: TF at 1.5 rpm (Helipath:ON) = 85,300 cps ± 10%
Stability: 30 days at 50°C